$19.99 – $117.99
303® Fabric Guard keeps fabrics fresh, soft, colorful and breathable…all while adding a powerful coating to repel water and prevent the most serious of stains. Use it to keep rugs clean and covers blemish-free. You can even spray it on your convertible top’s seams to prevent wicking. When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.
Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.
NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.
16oz – SKU 30605CSR
32oz – SKU 30606CSR
1gal – SKU 30607
303 Fabric Guard is the only product recommended by and for Sunbrella®, as well as other fabric manufacturers to restore lost water and stain repellency. It offers unbeatable protection against soiling, water-based AND oil-based stains, and is safe enough to use on the most delicate of fabrics.
303® Fabric Guard can be used on all types of fabrics, including natural fibers & synthetics. Great for use on your outdoor pillows and cushions, fabric awnings or canopies, umbrellas, Bimini boat tops, as well as fabric convertible tops and more! Find other great tips and uses for this product within our tips and tools page of our website
Use only on newly, cleaned, dry fabrics. For best results, treat fabrics in warm weather, of at least 70 degrees or warmer. In a well-ventilated area, apply 303® Fabric Guard on fabric until damp, overlapping in a crisscross pattern. Do not saturate. Let dry for 6-12 hours in a clean, dry environment before using or storing.
On average a 16oz. bottle treats 40-75 sq. ft. feet.
We recommend over-the-counter rubbing alcohol, dish soap and water to help remove from the unwanted surface.
While 303 Fabric Guard does not provide UV protection directly, it protects the original UV resistance of outdoor fabrics by adding a layer of water repellency and stain resistance, which helps prolong the life of the fabric.
No, this is only recommended for outdoor fabrics. Instead we would recommend 303 Stain Guard for interior fabrics.
We recommend using the sprayer provided with the bottle of 303 Fabric Guard because a paint roller has a tendency to yield mixed results. When applying with a roller, it is possible to lay the product on inconsistently and unevenly.
In it’s liquid form, yes. We recommend keeping the product away from flames or hot surfaces. However, once the product has been applied and cured (fully dried), it will not affect the fire resistance of the fabric, nor make it more flammable.
